Smeg AP64S3 Manual do Utilizador Página 1

Contents 24 1 INSTRUCTIONS FOR SAFE AND PROPER USE ____________________ 25 2 POSITIONING OF THE HOB ____________________________________ 27 3 E

Instructions for the installer 33 5.3 Regulation for LPG Check that the connection has been made as described in the “Gas connection” section

Instructions for the installer 34 5.4 Regulation for natural gas The hob has been inspected for G20 (2H) natural gas at a pressure of 20 mba

Instructions for the installer 35 5.5 Regulation of primary air Referred to distance “A” in mm. 60 cm hobs with separable control panel

Instructions for the installer 36 6 FINAL OPERATIONS Having carried out the above adjustments, reassemble the appliance following, backwards

Instructions for the installer 37 6.3 Arrangement of the burners on the hob (Hob with separable control panel) 60 cm. hob BURNERS 1

Instructions for the installer 38 6.4 Arrangement of the burners on the hob (Hob with built-in control panel). 60 cm. hob BURNERS

Instructions for the user 39 7 USING THE HOB Before turning on the burners, make sure that the burner rings, caps and grids have been fitted

Instructions for the user 40 7.3 Diameter of the pans Burners Ø min. and max. (en cm.) Auxiliary 12-14 Semirapid 16-20

Instructions for the user 41 WARNING When switching on the electric element for the first time, or if the electric element has not been used for a l

Instructions for the user 42 8 CLEANING AND MAINTENANCE Never use a steam jet to clean the appliance. Before any intervention, disconnect

Introduction 25 1 INSTRUCTIONS FOR SAFE AND PROPER USE THIS MANUAL IS AN INTEGRAL PART OF THE APPLIANCE AND THEREFORE MUST BE KEPT IN ITS E

Instructions for the user 43 8.2 Cleaning of cooking hob components CAUTION: do not wash these components in a dishwasher. In normal use of the

Introduction 26 THE IDENTIFICATION PLATE, WITH TECHNICAL DATA, SERIAL NUMBER AND MARKING IS CLEARLY VISIBLE UNDER THE CASING. THE PLATE ON THE CASI

Instructions for the installer 27 2 POSITIONING OF THE HOB The following operation requires building and/or carpentry work so must be carrie

Instructions for the installer 28 A+BA+BA+BA+B BB Fig.1 20÷40BA Fig.2 BA Fig.3 Fig.4 Fig.5

Instructions for the installer 29 3 ELECTRICAL CONNECTION Make sure that the voltage and capacity of the power line conform to the data show

Instructions for the installer 30 4 GAS CONNECTION Connection to the gas mains may be made with a rigid copper pipe or with a flexible pipe

Instructions for the installer 31 4.1 Connection to LPG Use a pressure regulator and make the connection to the tank according to the provis

Instructions for the installer 32 5 ADAPTATION TO DIFFERENT TYPES OF GAS Before performing any cleaning or maintenance work, disconnect the a