Smeg CV35XS5 Instruções de Utilização descarregar pdf (Página 6)

The door(s) can be changed from right-hinged to left-hinged and vice versa as follows:

Reversing the door(s)

1. Lay the appliance on its back with the

door uppermost.

2. Remove the upper hinge.

3. Move the plastic plugs to where the

upper hinge was tted.

4. Lift off the door and lay it aside.

10. Remember to pull the pin in the door

closer towards the side before tting

the door..

6. Loosen lock nut with the fork wrench

enclosed and move the pin.

11. Ret the door.

12. Fit the upper hinge.

9. Remove the door closer and ret it on

the opposite side.

5. Remove the kick plate by pulling it

outwards and upwards.

7. Remove the lower hinge. Rotate the

hinge through 180° and ret it on the

opposite side of the appliance.

8. Ret the kick plate

15. After reversing the door(s), it is important to check that the sealing strip provides a tight seal all the way round. If it does not, carefully

heat the strip all the way round using a hair dryer. Then ease the strip outwards slightly so that it forms a tight seal against the cabinet.

Be careful not to heat the strip so much that it melts!

13. Remove the door handle and ret it on

the opposite side. Ret the caps.

14. The appliance must be allowed to

stabilise in an upright position for at

least 1 hour before being switched on.

1 2 3 4 5 6 7 8 9 10 11 ... 14 15

Sem comentários

Smeg CV35XS5 Instruções de Utilização Página 6