Smeg SE2640TD2 Manual do Utilizador descarregar pdf (Página 19)

Installation

45

EN

5 Installation

5.1 Electrical connection

General information

Check the grid characteristics against the

data indicated on the plate.

The identification plate bearing the

technical data, serial number and brand

name is visibly positioned on the appliance.

Do not remove this plate for any reason.

Perform the ground connection using a wire

that is 20 mm longer than the other wires.

The appliance can work in the following

modes:

60-70-90 cm models:

• 220-240 V 3~

Use a 4 x 2.5 mm² four-core cable.

• 380-415 V 2N~

Use a 4 x 2.5 mm² four-core cable.

• 380-415 V 3N~

Use a 5 x 1.5 mm² five-core cable.

60-70 cm models:

• 220-240 V 1N~

Use a 3 x 4 mm² three-core cable:

Power voltage

Danger of electrocution

• Have the electrical connection

performed by authorised technical

personnel.

• Use personal protective equipment.

• The appliance must be connected to

earth in compliance with electrical

system safety standards.

• Disconnect the main power supply.

• Do not pull the cable to remove the

plug.

• Use H05V2V2-F cables withstanding a

temperature of at least 90°C.

• The tightening torque of the screws of

the terminal supply wires must be 1.5 - 2

Nm.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24

Comentários a estes Manuais

Sem comentários